PERLIFOC LD (Low Density) is a gypsum based fire resistant mortar with a higher concentration of lightweight aggregates. The reduced density means easier application and lower load on structures. With its thermal insulation properties it is used for passive fire protection in structural elements and compartmentation.
PERLIFOC LD is composed of expanded lightweight aggregates (perlite and vermiculite), hydraulic binders, setting retarders and additives to improve mechanical application.
PERLIFOC LD is applied wet with a mixer and compressor type mortar spraying machine, to protect structural elements of buildings in case of fire, in order to maintain stability and the loadbearing capacity of these elements until the fire is extinguished and/or the building is evacuated.
Density: 240 kg/m3
Comes in 12 kg bags on 504 kg pallets
PRIMER 036 is a quick drying, one-pack phenolic alkyd primer for the most common exposure conditions of an intumescent system.
EPOSOL 100 is a 2-pack anticorrosive epoxy primer to be used as an undercoat for intumescent systems in aggressive environments.
CHAR 21 waterborne intumescent paint for fire protection of steel structures, concrete and reinforced concrete structures, masonry, concrete and drywall partitioning walls, wood surfaces ....
CHAR 21Plus for fire protection of steel structures provides structural resistance to fire up to 90 minutes, with the most recent standard EN 13381-8 and CE mark.
CHAR 22 for fire protection of steel structures providing structural resistance to fire up to 2 hours. Solventborne formulation provides fast drying and durability in difficult environmental conditions with low temperature and high humidity.
PURETHAN is a two-pack polyurethane topcoat for intumescent coatigs. Approved for CHAR 21 and CHAR 22.
IDROSOL is a waterborne topcoat optimized and tested with our CHAR 21 and CHAR 22 intumescent coatings.
Waterborne intumescent coating for exterior exposure.
Specially designed for cable conduits for telecommunication.
CHAR 27 two-component epoxy intumescent coating.
Fire protection of steel and aluminium structures in severe fire conditions and harsh environment.
IDROSOL A2 is a waterborne topcoat with reduced flame spread and reaction to fire class A2