PURETHAN is a two-pack polyurethane acrylic topcoat for intumescent coatings.
Approved for CHAR 21 and CHAR 22 with specific fire tests according to ETAG 018.
The intumescent system including PURETHAN topcoat and proper primers will reach durability class X, fully exposed outdoors, according to ETAG 018 and classification in excess of C3 according to ISO 12944.
For long term outdoor durability, a system made of EPOSOL 100 epoxy primer, CHAR 22 solventborne intumescent coating and PURETHAN polyurethane topcoat is recommended. Specialist's application skills are required.
PURETHAN is available in white and standard RAL colours. Any specific shade can be supplied on request.
Colour: RAL shades or upon specification
Comes in 2-pack kit 24 kg (A+B) or 6 kg (A+B) ADR steel pails
PRIMER 036 is a quick drying, one-pack phenolic alkyd primer for the most common exposure conditions of an intumescent system.
EPOSOL 100 is a 2-pack anticorrosive epoxy primer to be used as an undercoat for intumescent systems in aggressive environments.
PRIMER 3500 is a waterborne primer for deep substrate impregnation of concrete, reinforced concrete, masonry and all porous mineral substrates.
CHAR 21 waterborne intumescent paint for fire protection of steel structures, concrete and reinforced concrete structures, masonry, concrete and drywall partitioning walls, wood surfaces ....
CHAR 21Plus for fire protection of steel structures provides structural resistance to fire up to 90 minutes, with the most recent standard EN 13381-8 and CE mark.
PRIMER 4500 is a specific waterborne primer for substrate impregnation of gypsum boards to enhance fireproofing performance of CHAR 21 on drywall.
CHAR 17 FINISH
CHAR 17 FINISH is the specific solventborne sealing topcoat for moisture protection of CHAR 17.
CHAR 22 for fire protection of steel structures providing structural resistance to fire up to 2 hours. Solventborne formulation provides fast drying and durability in difficult environmental conditions with low temperature and high humidity.
IDROSOL is a waterborne topcoat optimized and tested with our CHAR 21 and CHAR 22 intumescent coatings.
Waterborne intumescent coating for exterior exposure.
Specially designed for cable conduits for telecommunication.
CHAR 27 two-component epoxy intumescent coating.
Fire protection of steel and aluminium structures in severe fire conditions and harsh environment.
IDROSOL A2 is a waterborne topcoat with reduced flame spread and reaction to fire class A2